six round conversion for 97

[Lanky Frame]

How many companies make six round conversions for the 97?

[Boggus Deal]

Wild Bodie Tom was the only one who made a real conversion. With his sad passing on Tuesday, I know they will be available but not sure when. Give us a couple days and I can give you a better answer.

[marshal stone]

 

Check with Unique-Tec. they were selling them at one time.

 

Marshal Stone

[Lanky Frame]

Thanks

[lostvaquero]

Pioneer Gun Works has them also.That is where I got mine.

[Garrison Joe]

I've fixed all my Chinese 97s simply by cutting the magazine spring so that it's uncompressed length is about 3 inches longer than the magazine tube.  Haven't had to swap followers or use any of the 6-shell kits. If you want to cut a spring that is not the factory provided one, get a mag spring for a Remington 870 in 12 gauge.  Pretty cheap item.

 

Good luck, GJ

[Flash]

I've fixed all my Chinese 97s simply by cutting the magazine spring so that it's uncompressed length is about 3 inches longer than the magazine tube.  Haven't had to swap followers or use any of the 6-shell kits. If you want to cut a spring that is not the factory provided one, get a mag spring for a Remington 870 in 12 gauge.  Pretty cheap item.

 

Good luck, GJ

That is the way I did it also. I have cut one follower for a little extra. Found instructions on the internet somewhere, don't remember where sorry.

[Lanky Frame]

Good ideas guys. Maybe I'll try it. thanks

LF

[VICIOUS]

HI; I picked up a Winchester model 12 follower, put in into the 97 and clipped a few coils of the spring.