WildOkDee Posted December 21, 2019 Posted December 21, 2019 What are the standard length's for most of the shooters that cut the barrel down? Do most have choke tubes inserted? Many thanks for any positive advice and directions. Quote
Silvertip Posted December 21, 2019 Posted December 21, 2019 Mine is cut to 21inches. Do not put choke tubes in I did in mine and because the barrels are so thin there is not enough Thickness of the barrel to have enough threads in for the bead . Even drilled and tapped the choke and finally JB welded the bead on. ST Quote
Blackfoot Posted December 21, 2019 Posted December 21, 2019 Dee, I have 12's from 18 to 24 inches. If I were to do another I would cut it 22 to 24 inches. I can always cut it again but it is really difficult to put some back on. NO chokes. Blackfoot Quote
Two Dot Posted December 21, 2019 Posted December 21, 2019 24 to 26 is my preference. If you aren’t sure, start longer and try it. It’s easy to cut more off, not so to add it. Quote
WildOkDee Posted December 22, 2019 Author Posted December 22, 2019 Good information. Thank you all! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.