Jorge Posted August 12, 2019 Share Posted August 12, 2019 I saw on a previous thread that the Purcella bullets are favored. Which powder is good to try in the .303 Enfield for BAMM with the gas checked lead bullets? Quote Link to comment Share on other sites More sharing options...
Garrison Joe Posted August 12, 2019 Share Posted August 12, 2019 For Cast Bullets loading, usually if a powder is good in the .30-06, it works fine for .303 British loads too. The range of powders published in the Lyman Cast Bullet loading manual run: Unique - although it's a little fast for the good 1600-1800 FPS load that usually works well in BAMM competition - but great for plinking 2400 4227 5744 - most accurate in Lyman's testing 4198 And, would not be surprised if you are able to figure out a load with Trail Boss, Reloder 7, Varget or 2230, as well. Don't know that I would go to a slower powder than that last one. Not until you get some experience with what your gun likes to shoot. The .303 is very easy to load for, IF you have a bullet that matches the widely-varying groove diameters in the barrels. Slug yours to find out. Good luck, GJ Quote Link to comment Share on other sites More sharing options...
Jorge Posted August 13, 2019 Author Share Posted August 13, 2019 Thanks for the information. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.