September 10, 20188 yr Got playing around with some 38 super to see if could make 150pf and stay under 1000fps. Hornady lead 20 rounds. Avg 970 fps 160g lead bullet. 950 slowest 990 fastest. 152 pf low, 155 pf avg, 158 pf high.
September 10, 20188 yr Nice, thinking about setting up a gun for IPSC? What optics are you gonna run?, or are you going single stack?
September 10, 20188 yr Good info. I've also been bitten by the Super Bug, with 124 gr XTP and 147 gr Cast! That's a bit too hot at 1225 fps and 1025 fps respectively with Power Pistol so I'll reduce the powder. Next powder to try is Bullseye. Local store has no Accurate 7. How much of which powder did you load behind that 160 gr bullet?
September 10, 20188 yr Author Not sure if like the SASS Cowboy wire about reloading data but it was Win 231. More just wanted to see if I could make WB power factor in 1911 in other than 45acp.
September 10, 20188 yr wanted to see if I could make WB power factor in 1911 in other than 45acp. Well, a 1911 in 10mm will easily make 150 power factor, even major. 8) WB wire allows loading data. That puts a lot of responsibility on the READER to check that the data makes sense and is safe. I like it that way. Good luck, GJ
September 11, 20188 yr Author Not looking for IPSC major load. They are out there. More something that I wanted to try. Anyway started at 3.8 g worked up to 4.1g win 231.
September 11, 20188 yr Accurate #7 will very easily run a 155 to 160 grain lead slug at 1000 FPS, even up to 1100 FPS according to Lyman Cast Bullet handbook. Win 231 is a little fast burning to be pushing hard under those heavy slugs in .38 Super. In Lyman, they don't even list 231 with 147 grain bullets. Good luck, GJ
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.